• 87000 Stand-alone Data-Logging function (Points at single display mode)
• 43000 Stand-alone Data-Logging function (points at Dual Display mode)
• Multiple Data Recording.
• 4 Digit 10,000 counts large easy to read LCD display
• Fast measurements, 5 /sec; Fully Auto-ranging
• Dual Digital display
• 41 segment Analog Bar-graph updates 60/sec
• 0.08% high Basic DCV accuracy
• Optional purchase USB cable & software for Win98/2k/xp/Vista
• Intelligent Auto power off
• Data Hold
• Relative Zero mode
• Audible & Visible Beep jackTM Input warning against improper plug in
• AC, AC+DC True RMS conversion
• Record Max/Min readings, Auto-ranging
• Crest (Peak Hold) Max/Min readings, Auto-ranging
• Non-contact EF-Detection (NCV)
• Probe-contact EF-Detection for more precise indication of Live
• AutocheckTM feature (Automatic DCV, ACV & Ohms selection)
• Lo-Z Volts to drain Ghost voltages (AutocheckTM feature)
• Back-lighted large easy to read LCD display
• DCV 0.01mV to 1000V
• ACV 0.01mV to 1000V
• AC+DCV 0.01mV to 1000V
• DCA 0.1mA to 10A; 20A for 30 seconds per 5 minutes cooling
• ACA 0.1mA to 10A; 20A for 30 seconds per 5 minutes cooling
• AC+DCA 0.1mA to 10A; 20A for 30 seconds per 5 minutes cooling
• Ohms 0.1Ω to 60MΩ
• Conductance 0.01nS to 100nS
• Capacitance 60.00nF to 25mF
• T1 Type-K Temperature readings -50oC to 1000oC
• T2 Dual Type-K Temperature readings -50oC to 1000oC
• Line Level Frequency 5Hz to 200kHz
• Logic Level Frequency 5Hz to 2MHz
• Logic Level Duty Cycle readings 0.1% to 99.99%
• Diode Tester

• Double insulation per IEC61010-1 2nd Ed.,EN61010-1 2nd Ed., UL61010-1 2nd Ed. & CAN /CSA
• C22.2 No. 61010.1-0.92 to Category IV 1000V AC & V DC.
• Transient protection : 12kV (1.2/50µs surge)
• Pollution degree:2
• Measurement Category :CAT IV 1KV.
• E.M.C. : Meets EN61326-1:2006 , EN55022, EN61000-3-2, EN61000-3-3, EN61000-4-2,                  EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6, EN61000-4-8,                  EN61000-4-11

In an RF field of 3V/m:

• Capacitance function is not specified
• Other function ranges:
• Total Accuracy = Specified Accuracy + 100 digits

Overload Protections : 1000VDC and VAC rms

• Rugged fire retarded casing with battery access door
• Replaceable protective holster with probe-holders & Tilt-stand
• Optional purchase magnetic hanger
• 1000V (Ohm, Capacitance & all other Functions) Input protection
• 1000V High Breaking Capacity fuses protected on Current inputs
• LVD meets EN61010-1 CAT IV 1kV