E-mail


Kusam Meco-TRUE RMS DIGITAL MULTIMETER WITH VFD FEATURE-KM 869
View Full-Size Image

Kusam Meco-TRUE RMS DIGITAL MULTIMETER WITH VFD FEATURE-KM 869
Price per Unit (piece): Call for Pricing

Ask a question about this product


Beep-Jack Audible & Visible Input Warning
41 Segment Analog Bar-graph
Relative Zero Mode
PC Interface Capability
VFD-V & VFD-Hz readings
Crest (Instantaneous Peak Hold) function
• T1-T2 differential Temperature readings.
• 500,000 counts stable DCV mode
DC Voltage Basic Accuracy 0.02%
•AC; AC+DC True RMS Conversion AC. AC+DC
Voltage Bandwidth upto 100kHz (V) & 10kHz (A)
•5-4/5 Digit 500,000 counts large easy to read LCD
Dual display with white Backlight
Fast Measurements, 5/sec; Fully Auto-Ranging
Record MAX, MIN & AVG. readings
MAX & MIN readings & Data Hold Function
dBm function with 20 selectable values
High speed Capacitance measurement
1000V General Input Protection
Logic & Line Level Frequency
Logic Level Duty Cycle Readings & Diode Tester
Fast Audible Continuity & Diode tester
Auto Power Off
Display : 4-4/5 Digits 50,000 counts fast mode. Selectable stable mode 5-4/5 Digits 500,000 counts for DC Voltage & 5 digits 99,999 counts for Hz
Polarity : Automatic
Update Rate : 4-4/5 Digits fast mode : 5 per second nominal; 5-4/5 Digits stable mode : 1.25 per second nominal; 41 Segments Bar-graph : 60 per second max
Sensing : AC, AC+DC True RMS
Operating Temperature : 0°C to 45°C
Relative Humidity : Max. 80% R.H. for Temperature
up to 31°C decreasing linearly to 50% R.H. at 45°C
Pollution Degree : 2
Storage Temperature : -20°C to 60°C, <80% R.H. (with battery removed)
Altitude : Operating below 2000m
Temperature Coefficient : nominal 0.15 x ( specified accuracy)/°C @ (0°C ~ 18°C or 28°C ~ 45°C), or otherwise specified
Power Consumption : 6.5mA typical; 8mA for VFD ranges
Low Battery : Below approx 7V
APO Timing : Idle for 17 minutes
APO Consumption : 70µA typical
Power Supply : Single 9V battery
Weight : Approx. 635gm with holster
Dimension : 208(L) x 103(W) x 64.5(H) mm with holster.
Accessories : Carrying case, One BKP60 banana plug type-K Thermocouple.
Optional Accessories : PC interface kit, Bkb32 banana pins to K-type socket plug adaptor & Magnetic Hanger.
Double insulation per IEC61010-1 2nd Ed., EN61010-1 2nd Ed., UL61010-1 2nd Ed., & CAN/CSA C22.2 No. 61010.1-0.92 to Category IV 1000V AC & DC.
Transient Protection : 12 kV (1.2/50µs surge)
•Terminals (to COM) Measurement Category : V/A/mAmA : CAT IV 1000V AC & DC
Overload Protection : mA & mA : 0.44A/1000V, IR 10kA or better, F Fuse A : 11A/1000V, IR 20kA or better, F Fuse V, mV,Ω & Others : 1050Vrms, 1450Vpeak
EMC : Meets EN61326-1:2006 (EN55022, EN61000- 3-2, EN61000-3-3, EN61000-4-2, EN61000-4-3, EN61000-4-4, EN61000-4-5, EN61000-4-6,
EN61000-4-8, EN61000-4-11) In an RF field of 3V/m : Capacitance function is not specified
Other function ranges : Total Accuracy = Specified Accuracy + 100 dgts Performance above 3V/m is not specified.
Rugged fire retarded casing with battery access door
Replaceable protective holster with probe-holders & Tilt-stand.
1000V (Ohm, Capacitance & all other Functions) Input protection.
1000V High Breaking Capacity fuses protection on Current inputs.
LVD meets EN61010-1 CAT IV 1kV.
Click Images To Zoom In...
 Click Images To Zoom In...

Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.


Last Updated: Monday, 21 May 2012 01:38