E-mail


Kusam Meco DIGITAL MULTIMETER WITH EF DETECTION
View Full-Size Image

Kusam Meco DIGITAL MULTIMETER WITH EF DETECTION
Price per Unit (piece): Call for Pricing

Ask a question about this product


  • 3 5/6 Digits 6,000 Counts Large Easy to read LCD display
  • Transient protection up to 8KV (1.2/50 µs) lightning surge.
  • Fully Auto-Ranging
  • Max / Min Recording Mode
  • Low Battery Indication
  • Probe-Contact EF-Detection for more precise Indication of live.
  • ACV 0.1mV to 1000V
  • DCV 0.1mV to 1000V
  • ACA 0.001A to 10A
  • DCA 0.001A to 10A
  • Ohm 0.1Ω to 60 MΩ
  • Capacitance 60nF to 2000nF
  • Line level Frequency 40Hz to 60KHz
  • Diode Tester
  • Rugged Fire retarded double injected casing.
  • 600V (Input protection).
  • 0.5% Basic DCV Accuracy
  • Fast Measurements, 5/Sec
  • Intelligent Auto Power Off
  • Data HOLD
  • Non-Contact EF-Detection (NCV)
  • Beep-Jack Input warning against improper A-terminal plug in
  • Fast Audible continuity < 100mS
  • Battery access door with probe holders
  • LVD meets EN61010-1 CAT III 1KV. & CAT 1V 600V.
  • EMC EN61326 (97,98 / Al) / EN 61000-4-2 (95) / EN61000-4-3(96)

     

 

Operating Temperature
:
 10OC ~ 50OC < 80% R.H.
Storage Temperature
:
 -20OC ~ 60OC < 80% R.H. (With Battery removed)
Sensing
:
 Average sensing .
Pollution Degree
:
2
In an RF Field of 3V/m
:
 Capacitance function is not specified
Other function ranges
:
 Total accuracy = Specified accuracy + 45d
Performance above 3V/m is not specified
Safety
:
 The meter is protected, against the users, by double insulation per EN61010-1, IEC61010-1 2nd Ed., UL61010-1 2nd Ed. & CAN/CSA C22.2 No.61010.1-0 to “CAT III 1000V & CAT IV 600V”. Terminals (to COM) ratings.
V : Category III 1000 Volts AC & DC,
      and CAT IV 600 Volts AC & DC
A : CAT IV 600V AC & 500VDC, O/L Protection.
V : 1050V rms, 450V rms.
A : 15A/600V, IR 100KA, F fuse &
Others : 600VDC/VAC rms
Low Battery
:
 Below approx. 5.5V
Power Supply
:
 Standard 9V battery.
Power Consumption (typical)
:
 3µA for a function
APO Consumption(typical)
:
 20µA typical except 50µA.
APO Timing
:
 IDLE approx. > 30 minutes
Dimension
:
 173(L) x 83(W) x 48.5(H)mm
Weight
:
 Approx. 300gm.
Accessories
:
 Battery installed, Test lead pair, Manual & Carrying case.


Click Image To Zoom In...

Customer Reviews:

There are yet no reviews for this product.
Please log in to write a review.


Last Updated: Monday, 21 May 2012 01:34